Masterbuilt Electric Smoker Not Heating? Heat It Up Now!

Every product is independently reviewed and selected by our editors. If you buy something through our links, we may earn an affiliate commission at no extra cost to you.

Masterbuilt Electric Smokers are known for their efficiency in smoking meats and other food items. However, if you find that your electric smoker is not heating, it can be quite frustrating.

One common issue that may cause this problem is a malfunction in the heating element. The heating element is responsible for generating the heat needed to smoke your food, and if it is not working properly, the smoker will not heat up.

I will explore some troubleshooting steps you can take to address this issue and get your Masterbuilt Electric Smoker back to heating up efficiently.

How To Identify The Issue

If you are experiencing issues with your Masterbuilt Electric Smoker not heating, it is important to identify the problem in order to find a solution. There are several symptoms that can indicate a heating failure in your smoker.

Some common signs include the smoker not reaching the desired temperature, the heating element not turning on, or the smoker not maintaining a consistent temperature.

It is also important to check for any error codes that might be displayed on the control panel. These error codes can provide valuable information about the nature of the problem.

By identifying these symptoms and error codes, you can troubleshoot and address the issue with your Masterbuilt Electric Smoker efficiently.

Inspection And Diagnosis Process You Must Follow

  • Ensure the smoker is unplugged before starting any inspection or diagnosis.
  • Wear protective gloves to avoid any injuries.
  • Work in a well-ventilated area to prevent the accumulation of harmful gases.
  • Check if the power cord is properly connected to the outlet.
  • Inspect the heating element for any signs of damage or corrosion.
  • Examine the control panel for any error codes or unusual behavior.
  • A multimeter to measure the continuity of the heating element.
  • Screwdrivers to open the smoker and access the internal components.
  • A flashlight to inspect hard-to-reach areas.

If the smoker is not heating, these inspection steps and safety precautions are essential to identify potential issues and perform troubleshooting.

By following these guidelines, you can pinpoint the problem and take appropriate measures to fix your Masterbuilt Electric Smoker.

What Are The Common Causes For Heating Failures?

One of the common causes for heating failures in a Masterbuilt Electric Smoker is faulty heating elements.

These elements can wear out or become damaged over time, resulting in inconsistent or no heat production.

The second possible cause is thermostat malfunctions. If the thermostat is not functioning properly, it may not correctly regulate the temperature, leading to heating issues.

Lastly, issues with the control panel can also prevent the electric smoker from heating properly. If there is a problem with the control panel, it may not transmit the signals to the heating elements effectively, resulting in a lack of heat.

If you are experiencing heating problems with your Masterbuilt Electric Smoker, it is important to diagnose the issue accurately to determine the right solution.

Checking the heating elements, thermostat, and control panel for any signs of damage or malfunction is recommended.

Consulting the manufacturer’s manual or contacting customer support can provide further guidance on troubleshooting steps or potential repairs.

How To Fix If My Masterbuilt Electric Smoker Not Heating? 

One of the most common solution is to reset your Masterbuilt Electric Smoker when it is not heating, follow these simple steps:

  • Step 1: Ensure that the smoker is turned off and unplugged from the power source.
  • Step 2: Check the heating element for any signs of damage or wear.
  • Step 3: Inspect the thermostat to make sure it is properly set and functioning correctly.
  • Step 4: Reset the smoker by pressing and holding the reset button, usually located on the control panel.
  • Step 5: After releasing the reset button, plug the smoker back into the power source and turn it on.

If your Masterbuilt Electric Smoker is still not heating after following these steps, it is recommended to contact customer support for further assistance.

Remember to refer to your smoker’s manual for additional troubleshooting tips and instructions specific to your model.

Replacing Smoking Heating Elements

If you are experiencing heating issues with your Masterbuilt electric smoker, one possible solution is to replace the heating elements.

Here is a step-by-step guide to help you with the replacement process:

  1. First, make sure to unplug the smoker and allow it to cool down completely before attempting any repairs.
  2. Locate the faulty heating elements in your smoker. They are typically located at the bottom or sides of the unit.
  3. Once you have identified the elements that need to be replaced, find compatible replacements. You can check with the manufacturer or authorized dealers to ensure you purchase the right heating elements for your specific smoker model.
  4. Prepare the smoker for replacement by removing any racks or trays that may obstruct access to the heating elements.
  5. Using the appropriate tools, carefully disconnect the electrical connections of the old heating elements.
  6. Remove the old elements from the smoker and discard them appropriately.
  7. Install the new heating elements by following the reverse process of removal. Make sure to securely connect the electrical connections.
  8. Once the new elements are in place, reassemble any parts of the smoker that were removed.
  9. Finally, plug in the smoker and test the heating functionality to ensure the replacement was successful.

By following this guide, you should be able to replace the heating elements of your Masterbuilt electric smoker and resolve any heating issues you may be experiencing.

Checking Electrical Components

Inspecting power cords and outlets: One of the first steps to take when dealing with a Masterbuilt Electric Smoker not heating is to inspect the power cords and outlets.

Check if the power cord is securely connected to both the smoker and the outlet. Look out for any visible signs of damage or wear and tear on the power cord.

Ensure that the outlet is functioning properly by plugging another device into it. If the outlet is faulty, it may be necessary to replace it or use a different power source.

Testing the heating element: If the power cords and outlets are not the issue, testing the heating element is the next step.

Start by ensuring that the smoker is unplugged and cooled down. Locate the heating element and inspect it for any signs of damage or malfunction.

You can use a multimeter to test the electrical continuity of the heating element. If there is no continuity, it may need to be replaced.

Additionally, make sure that the heating element is clean and free from any debris or buildup.

Verifying thermostat functionality: Another crucial component to check is the thermostat. The thermostat regulates the temperature inside the smoker.

Ensure that it is set to the desired temperature and functioning correctly. You can use an oven thermometer to verify the accuracy of the thermostat readings.

If the temperature readings do not match, it may indicate a faulty thermostat that needs replacement.

Control Panel Solutions

In case your Masterbuilt Electric Smoker is not heating properly, there are several potential solutions to address issues related to the control panel.

Calibration of temperature control: One possible solution is recalibrating the temperature control. Refer to the user manual for instructions on how to recalibrate the control panel.

Firmware updates and fixes: Another solution is to check if there are any firmware updates available for your electric smoker model. Updating the firmware can often resolve control panel issues.

Access the manufacturer’s website or contact their customer support for assistance and guidance on firmware updates.

Replacing a defective control panel: If the above solutions do not resolve the issue, it may be necessary to replace the control panel.

Contact the manufacturer or an authorized service center to order a new control panel and follow their instructions for installation.

Servicing The Thermostat

The thermostat is responsible for regulating the temperature inside the smoker, so any problems with it can result in inconsistent heating or no heat at all.

If you suspect a problem with the thermostat, there are a few DIY servicing tips you can try before calling a professional.

Firstly, check if the thermostat is properly connected and securely mounted. Sometimes, loose connections can cause heating issues.

Secondly, ensure that the thermostat probe is clean and free from any debris that could interfere with its functionality. Lastly, if the thermostat is battery-powered, replace the batteries and see if that resolves the problem.

Remember, proper maintenance and regular cleaning can help prevent thermostat issues.

By following these simple tips, you can keep your Masterbuilt Electric Smoker running smoothly and ensure consistent heat for your smoking endeavors.

Professional Repair Or Replace Decisions

There may come a time when your Masterbuilt Electric Smoker is not heating properly, leaving you wondering whether to repair or replace it.

Seeking professional help is crucial in these situations, as they can accurately diagnose the problem and provide expert advice.

Cost-benefit analysis is also essential to determine the most suitable course of action. When considering repairs, evaluate the cost of parts, labor, and potential future issues.

In some cases, replacing the smoker may be a more cost-effective option. Furthermore, the age and condition of the smoker should be taken into account.

If it is an older model or has experienced frequent breakdowns, replacement might be the better long-term solution.

Ultimately, the decision depends on various factors, and it’s important to make an informed choice that aligns with your needs and budget.

Frequently Asked Questions

Why Is My Electric Smoker Not Getting Hot?

Troubleshoot your electric smoker if it’s not heating up. Check the power supply, ensure the heating element is working, and clean any debris that may be obstructing airflow. Don’t forget to monitor the temperature settings and give it enough time to heat up.

How Do I Reset My Masterbuilt Grill?

To reset your Masterbuilt grill, follow these steps: Turn off the grill and disconnect it from the power source. Wait for 30 seconds. Reconnect the grill to the power source. Turn on the grill and let it go through its initial startup process.

Your grill is now reset and ready to use.

How Do I Increase The Heat In My Electric Smoker?

To increase the heat in your electric smoker, adjust the temperature control knob to a higher setting. Ensure proper ventilation and air circulation inside the smoker. Preheat the smoker for about 15-20 minutes before placing the food inside. Consider using additional fuel or wood chips to generate more heat.

How Long Does An Electric Smoker Take To Heat Up?

An electric smoker typically takes about 15-30 minutes to heat up. The exact time may vary depending on the model and temperature setting.


Troubleshooting the heating issues of your Masterbuilt Electric Smoker requires a systematic approach. By checking the power source, examining the heating element, and ensuring proper ventilation, you can overcome these challenges. Remember to maintain and clean your smoker regularly to optimize its performance.

With these tips, you can enjoy consistently heated and delicious barbecue every time you fire up your Masterbuilt Electric Smoker. Happy smoking!

Leave a Comment