Masterbuilt Rotisserie Not Turning? Here’s The Troubleshooting Guide

Every product is independently reviewed and selected by our editors. If you buy something through our links, we may earn an affiliate commission at no extra cost to you.

The succulent aroma of rotisserie-cooked food can be a delight, but what happens when your masterbuilt rotisserie is not turning? 

Don’t worry; you’re not alone in this hiccup. Several reasons could be behind this issue, but fear not—I’ve got you covered with a comprehensive troubleshooting guide to help you get that rotisserie spinning again in no time.

What Are The Reasons For Not Turning The Masterbuilt Rotisserie?

When it comes to your Masterbuilt Rotisserie, there are a few potential issues that may cause it to stop turning.

Here are some common scenarios:

IssuePossible Cause
The rotisserie does not turn at allMotor malfunction, loose wiring connections, or damaged gears
The rotisserie turns slowly or inconsistentlyLow battery power, motor friction, or misaligned rotisserie rod
The rotisserie stops during cookingOverloaded rotisserie, excessive resistance, or overheated motor

How To Identify The Right Issues – Initial Diagnostic Steps

If your Masterbuilt Rotisserie is not turning, follow these initial diagnostic steps to identify the potential issues:

Double-check the power source: Ensure the rotisserie is properly plugged in and the power supply is functioning correctly.

Inspect the wiring connections: Examine all the wiring connections to make sure they are tight and secure. Loose connections can disrupt the power flow to the motor.

Check the battery status: If your rotisserie operates on batteries, make sure they are fully charged to provide sufficient power to the motor.

Examine the rotisserie rod: Ensure that the rotisserie rod is aligned properly and not obstructed by any food or debris. Misalignment or obstructions can cause the rotisserie to malfunction.

Now It’s time to fix the problem, Let’s dive in

Safety Precautions Before Attempting Fixes

Prior to attempting any fixes or repairs on your Masterbuilt Rotisserie, it is crucial to take the following safety precautions:

Disconnect the power supply: Before inspecting or working on any electrical components, disconnect the rotisserie from the power source to avoid any accidental electric shocks.

Allow the rotisserie to cool down: If the rotisserie has been recently used, make sure it has cooled down completely before touching or inspecting any parts to prevent burns or injuries.

Refer to the user manual: Always refer to the manufacturer’s user manual for specific safety instructions and guidelines pertaining to your Masterbuilt Rotisserie model.

By following these troubleshooting steps and taking the necessary safety precautions, you can address common issues with your Masterbuilt Rotisserie not turning. 

Remember to consult a professional or contact customer support if the problem persists or if you are unsure about performing any repairs yourself.

Know The Basic Rotisserie Components And Their Functions To Fix 

Before delving into the potential solution of a non-turning rotisserie, it is important to familiarize yourself with the basic components and their functions. 

By understanding how each part operates, you can better pinpoint the solution at hand.

Rotisserie MotorThe motor is responsible for generating the necessary power to rotate the spit rod, ensuring even and consistent cooking.
Spit RodThe spit rod is the metal rod that holds the food in place and spins it during the cooking process, allowing for thorough browning and an even distribution of heat.
Forks or ClampsForks or clamps are used to secure the food onto the spit rod, preventing it from moving or falling off while rotating.

Note: While these are the fundamental components, it is worth noting that the design and functionality may vary depending on the specific model of your Masterbuilt rotisserie.

Electrical Vs. Mechanical Problems

When troubleshooting a rotisserie that refuses to turn, it is essential to determine whether the issue is electrical or mechanical in nature. This will guide you towards the appropriate course of action for fixing the problem.

If you notice that the rotisserie motor is not running at all, or it is making strange noises, the issue is likely electrical. 

This could be caused by a faulty motor, loose wiring, or a problem with the power supply. 

In such cases, you may need to inspect and replace the motor, tighten any loose connections, or check the power source to ensure it is delivering sufficient electricity.

On the other hand, if the motor is running smoothly but the spit rod fails to rotate, the issue may lie in the rotating mechanism itself. 

It could be due to worn-out gears, a misaligned spit rod, or a lack of lubrication. In these situations, examining the gears for damage, realigning the spit rod, or applying lubricant to the moving parts may resolve the problem.

By distinguishing between electrical and mechanical issues with your Masterbuilt rotisserie, you can swiftly troubleshoot and rectify the non-turning problem, ensuring that your cooking adventures continue without a hitch.

Masterbuilt Rotisserie Not Turning

If you’re experiencing issues with your Masterbuilt rotisserie not turning, it can be frustrating, especially when you’re eager to enjoy a perfectly cooked meal. 

However, before you become disheartened, there are a few common culprits to consider. 

By conducting some immediate checks and troubleshooting the potential problems, you can quickly identify the cause and find the appropriate solution.

Symptoms And Immediate Checks

If your Masterbuilt rotisserie is not turning, there are a few symptoms you can observe to help pinpoint the problem. 

Here are some immediate checks to perform:

  • Check the power supply and ensure it is properly connected and functional.
  • Inspect the power switch to make sure it is in the “On” position.
  • Ensure that the rotisserie motor and spit rod are securely attached and properly aligned.
  • Verify that the rotisserie motor is receiving power by listening for any motor noise or vibrations.
  • Check for any obstruction or resistance that may be preventing the motor from turning, such as excess grease or food debris.

Power Supply And Switch Issues

Problems with the power supply or switch can often be the cause of a Masterbuilt rotisserie not turning. 

Here are some possible issues and solutions:

The rotisserie is not receiving power: Check the power cord for any damage and ensure it is securely plugged into a functional power outlet. 

If necessary, use a different outlet or an extension cord to rule out any power supply issues.

The power switch is faulty: Inspect the power switch for any visible damage or loose connections. If necessary, replace the power switch with a compatible one from the manufacturer.

Motor Problems And Solutions

If the power supply and switch are ruled out as the problem, the issue may lie with the rotisserie motor. 

Here are some potential motor problems and their solutions:

  • The rotisserie motor is making unusual noises or grinding sounds
  • The motor is not rotating the spit rod smoothly or at all

To address these motor-related issues, consider the following solutions:

  • Inspect the motor for any visible damage or signs of wear and tear. If necessary, replace the motor with a new one from the manufacturer.
  • Ensure that the spit rod is properly lubricated to allow for smooth rotation.
  • Check for any misalignment or bending of the spit rod. Straighten or realign it if needed.
  • If the motor is overheating, allow it to cool down before using it again.

Inspecting Rotisserie Attachments

These attachments are an essential component of the Masterbuilt rotisserie system, ensuring the smooth rotation of meats and other delicacies on the grill. 

However, there may be instances when the rotisserie fails to turn, hampering the perfect cooking experience. 

To address this issue, it is crucial to perform a thorough inspection of the rotisserie attachments. 

In this section, I will focus on three critical aspects: 

  1. Alignment,
  2. Balance considerations, and 
  3. Potential effects of wear and tear on performance.

Alignment And Balance Considerations

Achieving proper alignment and balance of the rotisserie attachments is key to facilitating their smooth and uninterrupted rotation. 

Misalignment or imbalance can result in unnecessary strain on the motor or produce wobbly rotation, compromising the desired cooking outcome. 

To ensure optimal performance, make sure to follow these guidelines:

  • Inspect the positioning of the spit rod. It should be centered and securely inserted through the meat, allowing for even weight distribution.
  • Check that the rotisserie forks or prongs are securely attached and evenly spaced along the spit rod. They should firmly hold the meat without any slippage during rotation.
  • Verify that the rotisserie brackets or brackets are properly aligned and firmly attached to the grill. Loose brackets can lead to instability and interfere with the smooth rotation of the attachments.
  • Ensure that the motor assembly is securely connected to the grill or rotisserie brackets, providing stable support for the rotation mechanism. Loose or unstable connections can hinder the turning motion.

Wear And Tear Effects On Performance

Over time, the rotisserie attachments can experience wear and tear, resulting in diminished performance. 

It is essential to monitor and address any signs of deterioration to ensure optimal cooking results. 

The following factors can significantly impact the performance of aging rotisserie attachments:

  • Inspect the condition of the spit rod for any signs of rust, bending, or damage. A compromised spit rod can affect the smooth rotation and stability of the attachments.
  • Check the rotisserie forks or prongs for wear, cracks, or loose parts. Damaged forks may fail to secure the food properly, leading to uneven cooking or even accidents.
  • Examine the rotisserie brackets or brackets for any signs of corrosion or weakening. Damaged brackets can compromise the stability and alignment of the attachments during rotation.
  • Ensure the motor assembly is functioning correctly, with the motor providing sufficient power and the gears turning smoothly. A worn-out or faulty motor can hinder the rotation of the attachments.

Regularly performing a thorough inspection of the rotisserie attachments and promptly addressing any alignment, balance, or wear and tear issues is vital to maintaining the effectiveness and longevity of these essential components of the Masterbuilt rotisserie system. 

By ensuring proper alignment and addressing signs of wear, you can continue to enjoy perfectly cooked meals with the satisfaction of a smoothly rotating rotisserie.

Can I Replace The Motor On My Masterbuilt Rotisserie?

Yes, you can replace the motor on your Masterbuilt rotisserie. Check the manufacturer’s website or contact customer support to find the compatible motor for your specific model. 

Follow the provided instructions to safely remove the old motor and install the new one.

It’s recommended to seek professional help if you’re unfamiliar with the process.


A non-turning Masterbuilt rotisserie can put a damper on your culinary plans, but with a methodical approach to troubleshooting, you can likely identify and resolve the issue. From checking power connections to examining the motor and gears, these steps should help you get your rotisserie back in action and have you savoring perfectly cooked meals once again.

Remember, patience and careful examination of the components are key. And when in doubt, don’t hesitate to seek professional help or contact the manufacturer for guidance tailored to your specific model. With a little persistence, you’ll soon be enjoying the delicious flavors of your rotisserie creations once more.

Leave a Comment